China Lubricating Greases Manufacturers,Multi Purpose Grease Suppliers
(4) Viscosity The degree of hardness of the grease is the physical amount of the depth of the grease (indicated by 0.1 mm) in the metal cone of the specified weight within 5 seconds. The larger the value, the softer the ...
“Is overlubrication or underlubrication a bigger problem when it comes to bearing lubrication?” To answer this question, it first is important to understand that overlubrication and underlubrication can refer to two diff...
What is the typical base oil viscosity of a grease for high-speed bearings?" The base oil component of grease is what provides the essential separation between two surfaces that may come in contact. Therefore, selecting ...
"Could using the wrong grade of lubricant instead of the manufacturer's recommended grade cause a bearing failure?" Disregarding the manufacturer's recommendations for any piece of equipment or component could potentiall...
Follow these steps when selecting a high-temperature grease: Determine the real temperature range. The operating temperature may be less than what it seems. Use a contact or noncontact sensor to measure the operating tem...
A grease consists of three constituents: the base oil, the additives and the thickener. These formulations are carefully selected and tested thoroughly by grease manufacturers to ensure the combination works well to perf...
Direct Contact:+86-571-64756996
Email:admin@hzxg.com